Contact Us

Contact Person : Nature Xu

Phone Number : +8613760266213

WhatsApp : +8613760266213

Free call

Sliver Dental Handpieces And Accessories , High Speed Air Turbine Handpiece Wrench Type

Packaging Details : 1 set per box Delivery Time : depending on the quantity
Payment Terms : T/T, Western Union, Paypal
Place of Origin: Guangdong, China (Mainland) Brand Name: OEM
Certification: CE

Detail Information

Material: Stainless Steel Packing: 1 Set Per Box
Rotation Speed: >=360,000rpm Chuck Type: Key Chuck Type
Noise: ≤60dB Fucation: 3 Water Spray / Single Water Spray
High Light:

dental lab equipment


dental handpiece parts

Product Description

High Speed Wrench Type Handpieces Air Turbine Dental Handpieces with Mini Head


(Same as Pana Air)



Quick Detail :



1. Mini ,Standard or Torque Head

2. Cartridge for Handpiece

3. Key Type ( 4 or 2 holes )

4. Turn Smooth, Low Noise

5. Use Best Bearing, Long Durability


6. Air pressure: 0.2 - 0.24 Mpa


7. Rotation Speed : >=360krpm ( Standard )

                                >=300krpm ( Torque Head )


8. Chuck Type : Push Button or Wrench


9. Bur applicable : φ 1.59 mm ~ φ 1.6 mm * 21 mm ~ 23 mm (diameter * length) 


10. Noise : <=60db



Specifications :



1. Fucation : 3 water spray / Single water spray
2.Bur applicable: diameter 1.59~diameter 1.6mm*21mm ~ 23mm ( diameter * length )
3.Water pressure: 2.2~2.7kgf
4.Turns speed : 350, 000~400, 000 rpm



Description : 


1. The need to use a clean , dry , oil-free air compressors for medical use 

2. The air pressure between 2.3-2.8kgf / cm2

3. Place the adapter with quick connector at the bottom of a combination of dental handpieces , and confirm that the card lock fixed 

4. Press the pedal , handpiece operation and examine whether the normal operation of the spray head . If everything is normal, you can start using the handpiece .



After each patient use , maintenance should be done as follows:


1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate 

2. Use a metal needle to clean the spray holes and fumaroles 

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) 

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom 

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) 

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain 

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization


Sliver Dental Handpieces And Accessories , High Speed Air Turbine Handpiece Wrench Type 0

You Might Be Into These
Get in touch with us

Enter Your Message